RGPV B.E Electronics&Communication 4th Semester (Grading System) Syllabus

                                     B.E. 401 - ENGINEERING MATHEMATICS III


Unit I
Functions of complex variables : Analytic functions, Harmonic Conjugate, Cauchy-Riemann Equations, Line Integral, Cauchy’s Theorem, Cauchy’s Integral Formula, Singular Points, Poles & Residues, Residue Theorem , Application of Residues theorem for evaluation of real integrals

Unit II
Errors & Approximations, Solution of Algebraic & Trancedental Equations (Regula  Falsi , Newton- Raphson, Iterative, Secant Method), Solution of simultaneous linear equatins by Gauss Elimination, Gauss Jordan, Crout’s methods , Jacobi’s  and Gauss-Siedel Iterative methods

Unit III
Difference Operators, Interpolation ( Newton Forward & Backward Formulae, Central  Interpolation Formulae, Lagrange’s and divided difference formulae ),  Numerical Differentiation and Numerical Integration.

Unit IV
Solution of Ordinary Differential Equations(Taylor’s Series, Picard’s Method, Modified Euler’s Method, Runge-Kutta Method, Milne’s Predictor & Corrector method ),  Correlation and Regression, Curve Fitting (Method of Least Square).

Unit  V
Concept of Probability : Probability Mass function, Probability density function. Discrete  Distribution: Binomial, Poisson’s, Continuous Distribution: Normal Distribution, Exponential Distribution ,Gamma Distribution ,Beta Distribution ,Testing of Hypothesis |:Students t-test,  Fisher’s z-test, Chi-Square Method



                                               EC-402 Electromagnetic Theory   



Unit I 
Review of vector calculus: orthogonal coordinate systems, gradient, divergence and curl. Laplacian operator for scalar and vectors. Vector integral and differential identities and theorems. Phasor representation of harmonic variation of scalar and vectors Static electric fields , Columb’s law, electric flux density and electric field intensity, permittivity, dielectric constant, field of distributed charges in free space, potential function, Laplace’s and Poisson’s equations, electric dipole, stored electric energy density. Boundary conditions at abrupt discontinuities between two media including conducting boundaries, surface charge distribution capacitance between two isolated conductors

Unit II 
Solution of Laplace’s equations in systems of dielectric and conducting boundaries, uniqueness theorem, two dimensional boundary condition problems, solution by symmetry, conformal transformation of functions, image theory etc. fields in parallel wire, parallel plane and coaxial systems. Static currents and magnetic fields - flow of charge in conductive media, lossy conductive medium, current density, specific conductivity, mobility, explanation of Ohm’s law employing mobility. Magnetic effects of current flow, Biot-Savart’s law in vector form magnetic field intensity, magnetic flux, and permeability, closed loop currents, Ampere’s circuital law in integral and differential vector form, magnetic vector potential and related equations. Problems related to straight wire toroidal and cylindrical solenoids, inductance. Boundary conditions on magnetic field, equivalent surface currents for abrupt discontinuity of magnetic field.

Unit III 
Time varying fields – Faraday’s law in integral and differential forms, displacement current concept, Maxwell’s equations in differential and integral forms, wave equations in source free region electric and magnetic stored energy density, continuity equation, Poynting vector theorem. Time harmonic fields, r.m.s. phasor representation of field vectors, Maxwell’s equations for TH field, average energy density, complex Poynting vector, duality concept. Helmholtz wave equation, general solution in free space in various coordinates, plane polarized wave in free space, properties of plane waves, wave front, power flow, stored energy density.

Unit IV 
Circular and elliptic polarization , resolution in terms of linear polarized waves and vice- versa. Plane waves in lossy medium, low loss dielectric, good conducting and ionized media, complex permittivity, loss tangent, skin depth, transmission line analogy, boundary conditions at perfect conductor surface, surface current density Interference of two plane waves traveling at oblique directions.

Unit V 
Reflection and refraction of plane waves at dielectric media and conducting Surfaces, Brewster’s angle, total internal reflection, resultant fields and power flow in both media. Frequency dispersive propagation, phase velocity and group velocity. Magnetic vector potential for sources in free space, retarded potential, radiation principles, boundary condition at infinity



                                                            EC-403 Digital Electronics


Unit-I
Review of Number systems and Binary codes , Binary arithmetic – addition, subtraction, multiplication and division algorithms. Boolean algebra : theorems and functions, Simplification of Boolean functions, minimization techniques, Karnaugh's map method, Quine and McCluskey's method, realization of various binary functions using AND ,OR , NOT,XOR logic gates.

Unit-II
Universal gates : NAND, NOR, realization of boolean function using universal gates. Half and full adder, half and full subtractor, Series and parallel adder, BCD adders, lookahead carry generator. Decoders, Encoders, multiplexers and de-multiplexers. Analysis and design of combination circuits, realization of various Boolean functions using NAND, NOR gates and multiplexers.

Unit-III
Multivibrators : Astable, Monostable and bistable multivibrators, 555 timer chip and its application in multivibrators. Flip-Flops : R-S, Clocked R-S, T, D, J-K, race around problem, Master-slave J-K., State and Excitation Tables. Shift registers and counters :synchronous and asynchronous counters, Binary ripple counter, up-down counter, Johnson and ring counter. Analysis and Design of Sequential Circuits.

Unit-IV
Semiconductor memories : Organization and construction of RAM, SRAM, DRAM, RAMBUS ROM, PROM, EPROM, EEPROM, PAL and PLAs etc

Unit-V
Logic families : RTL, DTL, TTL, ECL, IIL, PMOS, NMOS and CMOS logic etc. Interfacing between TTL and MOS, vice-versa.


List of Experiments :
Step 1: Circuit should be designed/drafted on paper.
Step 2: The designed/drafted circuit should be tested on the bread board.
Step 3: The bread board circuit should be fabricated on PCB by one batch using PCB machine.

1. To test and study of operation of all logic Gates for various IC's.
2. Implementation of AND, OR, NOT, NOR, X-OR and X-NOR Gates by NAND and NOR Universal gates.
3. Binary Addition by Half Adder and Full Adder circuit.
4. Binary Subtraction by Half Subtractor and Full Subtractor circuit.
5. Design a BCD to excess-3 code converter.
6. Verification of the Demorgan's Theorem.
7. Study of RS, JK, T & D flip-flops.
8. Multiplexer/Demultiplexer based boolean function realization.
9. Study and Application of 555 timer (Astable, Monostable, Schmitt trigger, VCO



                                               EC-404 Electronic Circuits



Unit-I
Amplifier Basics , Transistor as an amplifier, load line, Q-point and its selection criteria, designing of fixed bias and self-bias, stability of biasing circuits, calculation of stability factor. Transistor at low frequency : frequency response, bandwidth, h-parameter analysis of CC, CB and CE configuration, simplified model, gain and impedance calculation of single stage amplifier. Transistor at high frequency , high frequency model (hybrid-
π ), Parameters and their definition, Miller capacitance
and its effect on voltage gain,

Unit-II  
Feedback amplifier : positive and negative feedback loop gain, effect of negative feedback on gain stability, distortion, bandwidth, input and output impedance of amplifier, types of feedback (voltage, current, series and shunt) and their analysis. Oscillators : condition of sustained oscillation, RC phase shift, LC (Hartley and Collpit) Oscillators, Wein Bridge, Negative resistance (Tunnel diode and UJT) oscillators, crystal oscillators.

Unit III
Power amplifier , classification, operation, analysis and design of Class A, Class B, Class-AB, Class C, transformer coupled, push pull and complementary symmetry amplifiers, power dissipation in transistors (Pdmax rating) and efficiency calculations. Tuned amplifier and its applications, Q factor, selectivity and bandwidth, effect of loading, double tuning (synchronous and stagger)

Unit IV  
Cascade amplifiers , Calculation of gain, Input and output impedance, Effect of Cascading on bandwidth, Transformer, RC and direct-coupled amplifier and their performance. Darlington connection , equivalent circuit and Calculation of gain and impedances, Cascade amplifier: advantage, circuit diagram and analysis, feedback pair and applications of BIFET, Bootstrapping technique. Differential amplifier - configuration, transfer characteristics, DC analysis, h-parameter analysis, differential and common mode gain, CMRR, constant current source and current mirror, level shift.

Unit-V  
Operational amplifier (IC741), specifications, ideal and practical characteristics, frequency response, unity gain bandwidth, limitations, slew rate and its effect on full power bandwidth, input offset voltage, bias and offset currents, compensation. Applications of Op-Amp: I nverting and non-inverting amplifier Analog computation, summer (inverting and non- inverting), averager, integrator, differentiator, scalar, sign changer, phase changer, multiplier, buffer, Differential amplifier, instrumentation amplifier, comparator, Schmitt trigger, precision rectifier, log and antilog amplifier, voltage-to-current and current-to-voltage converter.

List of Experiments: 
Step 1: Circuit should be designed/drafted on paper. 
Step 2: The designed/drafted circuit should be tested on the bread board 
Step 3: The bread board circuit should be fabricated on PCB by one batch using PCB machine.

1. Characteristics of Op-Amp (input offset voltage, slew rate, CMRR, BW, input bias current.
2. Linear application of Op-Amp (voltage follower, inverting and non-inverting amplifier and their frequency response, adder, substractor, differential amplifier, integrator and differential frequency response)
3. To design and construct a shunt and series regulator and find line and load regulation.
4. Design and performance evaluation of transistor amplifiers in CE, CB and CC configuration
5. Design and performance evaluation of FET amplifiers.



  
                                                          EC-405 Analog Communication


Unit-I  
Signal Analysis: Vectors and signals, orthogonal functions, Fourier series, Complex Fourier spectrum, Fourier Transform, Time domain and frequency domain representation of a signal, Existence of the FT, FT of some useful functions like exponential signal single sided & double sided, Gate function, singularity functions, FT of various functions, Properties of FT, Convolution, Convolution with Impulse Function.  Signal Energy and Power: Spectral Density of various types of signals, Spectra (Parseval’s Theorem), Density Spectra of Periodic Gate and Impulse train. Linear Time Invariant (LTI) Systems Casual and Non Causal System, Distortion less System, Impulse Response of Distortion less System, Ideal Filter and Practical Filter.

Unit-II  
Modulation Techniques : Need and types of modulation techniques, Amplitude Modulation, Frequency Spectrum, Power Distribution, Modulation by Complex Signal, Low Level and High Level AM Modulators, Linear Integrated Circuit AM Modulators, Suppressed Carrier Generation (Balance/Chopper and Square Law Modulation), SSB Generator (Phase and Frequency Discrimination Method), VSB Transmission and Application. Detection of AM signals: Envelope Detector Circuit, RC Time Constant, Synchronous Detection Technique, Error in Synchronous Detection, SSB signal detection, PLL and its use in demodulation.

Unit-III  
Angle Modulation : Frequency and Phase Modulation Frequency spectrum, bandwidth requirement, Frequency and Phase Deviation, Modulation Index, NBFM and WBFM, Multiple frequencies FM. FM Modulators: Direct (Parameter Variation Method) and Indirect (Armstrong) Method of frequency modulation. FM Detector: Slope Detector, Foster Seely Discriminator, Ratio Detector and PLL detectors.

Unit-IV  
Radio Transmitters : AM transmitter, block diagram and working of Low Level and High Level Transmitters, Trapezoidal Pattern and Carrier Shift, SSB Transmitters, FM transmitters - Frequency Multiplication Applied to FM Signals, FM transmitters. Radio Receivers : Block Diagram of Radio Receiver, Receiver Characteristics (Selectivity, Fidelity and Sensitivity), AM Receiver, RF Receiver, Super-heterodyne Receiver, RF Amplifier, Frequency Mixer, AVC and AFC, Image Signal, Intermediate Frequency Selection, Diversity Reception, FM Receiver.

Unit-V  
Noise : Sources and types of noise and their power density, White Noise, Noise from Single and Multiple noise source for Linear Systems, Super Position of Power Spectrum, Equivalent Noise Bandwidth, Noise Figure, and Equivalent Noise Temperature, their Relationship, Calculation of Noise Figure and Noise Temperature for Cascade Systems,

List of Experiments :
Step 1: Circuit should be designed/drafted on paper. 
Step 2: The designed/drafted circuit should be tested on the bread board. 
Step 3: The bread board circuit should be fabricated on PCB by one batch using PCB machine.

1. Analysis of AM Modulation and Demodulation Techniques (Transmitter and Receiver), Calculation of Parameters
2. Analysis of FM Modulation and Demodulation (Transmitter and Receiver) and Calculation of Parameters 3. To Construct and Verify Pre-emphasis and De-emphasis and Plot the Waveforms.
4. Study of Super-heterodyne Receiver and Characteristics of Radio Receiver.
5. To Construct Frequency Multiplier Circuit and to Observe the Waveform
6. Study of AVC and AFC.
7. Study of PLL chip (566) and its use in various systems



                                                         COURSE: EC-406 Software Lab-II


ADVANCED SIMULATION/ VERIFICATION SOFTWARE
Study of simulation/ verification software (any one- LAB-VIEW/KTECHLAB/ GNU CIRCUIT

ANALYSIS PACKAGE/ LOGISIM/ MULTISIM/ SCILAB etc). 
Overview and Study of the key features and applications of the software.  Application of the software in the field of Electronic Circuits, Digital Electronics and Analog Communication. Design, Optimization, simulation and verification of  1. Electronic circuits (example amplifiers, oscillators etc). 2. Realization and verification of various digital electronic circuits (example logic gates, adders, subtractors etc) 3. Realization of various signals and communication link etc.
Students should simulate and verify atleast six circuits they are learning in the current semester.  

Continue Reading →

RGPV B.E ELECTRICAL AND ELECTRONICS 4th Semester (Grading System) Syllabus

                                      B.E. 401 - ENGINEERING MATHEMATICS III 


Unit I 
Functions of complex variables : Analytic functions, Harmonic Conjugate, Cauchy-Riemann Equations, Line Integral, Cauchy’s Theorem, Cauchy’s Integral Formula, Singular Points, Poles & Residues, Residue Theorem , Application of Residues theorem for evaluation of real integrals

Unit II 
Errors & Approximations, Solution of Algebraic & Trancedental Equations (Regula  Falsi , Newton-Raphson, Iterative, Secant Method), Solution of simultaneous linear equatins by Gauss Elimination, Gauss Jordan, Crout’s methods , Jacobi’s  and Gauss-Siedel Iterative methods

Unit III 
Difference Operators, Interpolation ( Newton Forward & Backward Formulae, Central  Interpolation Formulae, Lagrange’s and divided difference formulae ),  Numerical Differentiation and Numerical Integration.

Unit IV 
Solution of Ordinary Differential Equations(Taylor’s Series, Picard’s Method, Modified Euler’s Method, Runge-Kutta Method, Milne’s Predictor & Corrector method ),  Correlation and Regression, Curve Fitting (Method of Least Square).

Unit  V 
Concept of Probability : Probability Mass function, Probability density function. Discrete  Distribution: Binomial, Poisson’s, Continuous Distribution: Normal Distribution, Exponential Distribution ,Gamma Distribution ,Beta Distribution ,Testing of Hypothesis |:Students t-test,  Fisher’s z-test, Chi-Square Method




                         EX- 402 – ELECTRICAL AND ELECTRONICS MATERIAL


Unit I  
Classes of Engineering Materials – Metals & alloys, ceramics, organic polymers and composite material. Classification of solids from electrical Engineering point of view. Conducting material – properties of conductors, characteristics of good conductor material, commonly used conducting materials, conductor materials for overhead lines, types of conductors, conductor for underground cables, conductor materials used for electrical machines winding, resistor materials, types of resistors, materials for bus bar. Thermal conductivity of matter, super conductivity. Materials of MHD generator, Fuel cells, Thermoelectric generators, Thermonic conductors

Unit II  
Dielectric Materials: Dielectric strength, factors affecting dielectric strength, dielectric loss, dissipation factor, factors affecting dielectric loss, permittivity & polarization, charging and discharging of dielectric, conduction through dielectric. Application of dielectric, different types of capacitors and materials used for them.Insulating materials, their properties – thermal, chemical, mechanical & electrical. Insulating materials like ceramic, mica, glass, rubber, resins, wax varnishes, Class of Insulation. Transformer oils & their testing. Piezoelectricity & Ferro electricity.

Unit III  
Applications of semi conductor materials: type of semi conductors, working and applications of semiconductors, Temperature sensitive elements, photoconductive cells, photo voltaic cells; Varistor, Hall effect generator, LCD, Light dependent registors, LEDs, piezo – electric materials, semiconductor laser and its characteristics, photo conductors – photo diodes, avalanche photo diode, photo transistors.

Unit IV
Classification of magnetic materials : Dia-magnetism, Para magnetism, Ferro- magnetism, magnetisation curve, hysterisis loop, Magnetostriction, Factors affecting permeability and hysterisis, Anti – ferromagnetism, Ferrimagnetism, Magnetic resonance, B-H curve for different magnetic materials, loss of magnetism, impurities in ferromagnetic materials, soft and hard magnetic materials, ferrites. Fiber optic materials, lasers Special Purpose materials – Thermo couple, soldering, fuse, contact, refractory, fluorescent & phosphorescent, galvanizing and impregnation.

Unit V  
IC Fabrication : planar process – Fabrication of BJT, FET, & CMOS devices, Monolithic diodes – Contacts – IC resistor & Capacitors - IC packaging – characteristic of IC components.



         
                             EX- 403 – DIGITAL ELECTRONICS LOGIC DESIGN –I 


Unit I  
Number Systems and Codes : Digital number systems, base conversion, Binary, Decimal, octal, Hexadecimal, number system with radix r, Gray codes. Alphanumeric codes – ASCII code and EBCDIC codes, Hollerith code, concept of parity, complement r’s & (r-1)’s, subtraction with complements, signed Binary numbers, Error Detecting & Correcting codes. Basic Theorems & Properties of Boolean Algebra: AND, OR, NOT operators, laws of Boolean Algebra, Demorgon’s theorem, Boolean expression & logic diagram. Negative logic, Alternate logic gate representation (concept of bubbled gates) canonical and standard Forms (Minterms & Maxterms), sum of minterms & product of maxterms, conversion between canonical forms. Truth table & maps, 2,3,4,5 and 6 variable maps, Solving digital problems using Maps, Don’t care conditions, Tabular minimization. Sum of product & product of sum reduction, Exclusive OR & Exclusive NOR circuits, Parity generator & checkers.

Unit II  
Combinational Circuits : Design procedure, Adders (half and Full), subtractor (half and full) code convertors, Analysis of design, Universal building blocks, Implementation of any logic circuit with only NAND gates or with only NOR gates, Binary serial adder, parallel adder, serial/parallel adder, look ahead carry generator, BCD adder, Binary multiplier, Magnitude comparator, Decoder, Demultiplexer, Encoders, priority encoder, Multiplexers & implementation of combinational logic diagram, HDL for combinational circuit.

Unit III
Sequential Logic Circuit : Latches, SR latch with NAND & NOR gates, D latch, edge triggered flip flop, J-K flip flop, T flip flop, Master slave flip flop, Analysis of clocked sequential circuit, state table, state diagram, state reduction state equations, state assignments, flip flop excitation table & characteristic equations, Design procedure for sequential circuits, Design with state reduction, Applications of flip flop.

Unit IV
Registers and Counters : Asynchronous and Synchronous counter, counters with MOD numbers, Down counter, UP/DOWN counter, propagation delay in ripple counter, programmable counter, Pre-settable counter, BCD counter, cascading, counter applications, Decoding in counter, Decoding glitches, Ring Counter, Johnson counter, Rotate left & Rotate right counter, Registers – Buffer, Shift left, shift right, shift left/Right registers, parallel in parallel out, serial in serial out, parallel in serial out, serial in parallel out registers.

Unit V  
Random Access Memory, Timing waveform, Memory Decoding, Internal Construction, Coincident decoding, Address multiplexing, Read only memory – Combinational circuit implementation, Type of ROMs, combinational PLDs, Programmable Logic Array (PLA), Programmable Array Logic (PAL), sequential programmable device. Analog to digital conversion – Ramp type, dual slope, integration, successive approximation, parallel conversion, parallel/ serial conversion, convertor specifications, Digital to Analog convertors – Binary weighted & R/2R D to A convertors.


List of Experiments :  
1. Verification of all the logic gates.
2. Design of BCD to Excess-3 code converter.
3. Implementation of NAND & NOR as Universal gate.
4. Design of RS, JK, T& D Flip flop.
5. Multiplexer /Demultipexer based boolean function
6. Design of combinational circuit for the (i) Half adder (ii) Full adder (iii) Half subtractor (iv) Full subtractor 7. Design various A-D & D-A convertors.




                                              EX- 404 – ELECTRICAL MACHINE - I 


Unit-I
Transformer-I 
Working principle, e.mf. equation, construction, phasor diagrams, equivalent circuit, voltage regulation, losses, separation of hysteresis and eddy current losses, efficiency, tests: open circuit and short circuit, load, Sumpner’s test, Condition for maximum efficiency and regulation, Power and distribution transformer, allday efficiency, Excitation phenomenon, Autotransformer: working, advantages , its equivalent circuit and phasor diagram.

Unit II 
Transformer-II 
Three phase transformer: its construction, groups and connections, their working and applications; Scottconnection; Parallel operation of Transformers: application, advantages, requirement and load sharing; Tap changers, cooling, conservator and breather. Pulse and high frequency transformers.

Unit III 
Three phase Induction Motor- I 
Working principle, construction, comparison of slip ring and squirrel cage motors, steady state analysis, phasor diagram and equivalent circuit, power flow diagram, torque-speed and power-speed characteristics, Losses and efficiency, No load and block rotor test, circle diagram

Unit IV 
Three phase Induction Motor-II 
Starting of squirrel cage and slip ring motors, power factor control, Cogging & Crawling, Double cage &Deep bar Indication Motor, impact of unbalanced supply and harmonics on performance, speed control, braking, Induction Generator. Applications

Unit V 
Single Phase Motors : 
Single Phase Induction motor; double revolving field theory, equivalent circuit and its determination, performance calculation, starting methods and types of single phase Induction motors: their working principle and applications, comparison with three phases Induction Motor. Single phase A.C. series motor, Servo motors, Linear Induction Motor


List of Experiments:  
Experiments can cover any of the above topics, following is a suggestive list:
1. Perform turn ratio and polarity test on 1-phase transformer
2. Perform load test on a 1-phase transformer and plot its load characteristic
3. Perform OC and SC tests on a 1-phase transformer and determine its equivalent circuit. Also find its efficiency and regulation at different load and power factor.
4. Perform OC and SC tests on a 3-phase transformer and determine its equivalent circuit. Also find its efficiency and regulation at different load and power factor.
5. Perform Sumpner’s test on two 1-phase transformer and determine its efficiency at various load.
6. Perform No-load and block rotor test on a 3- phase IM and determine its equivalent circuit.
7. Perform load test on a 3- phase IM and plot its performance characteristics.
8. Study various types of starters used for 3- IMs.
9. Perform No-load and block rotor test on a 1- phase IM and determine its equivalent circuit.                    




                          EX- 405 – ELECTRONIC DEVICES AND CIRCUITS-II 


Unit I  
Operational Amplifiers: Design aspects of Monolithic OpAmps, ideal characteristics, specifications, offset voltages and currents, frequency compensation techniques, measurement of opamp parameters, applications of op-amp inverting, non inverting amplifiers, integrators, function generator, logarithmic amplifier, instrumentation amplifiers, signal conditioning circuits, multi- vibrators, square wave generator, rectifiers, peak detectors & voltage regulator.

Unit II  
Filters: Active filters, LPF, HPF, BPF, BEF, All pass filter, higher order filters & their design, switched capacitor filters, 555 timer and its applications, 556 function generator IC and its applications, phase locked ICs (PLL) 565 and their applications. IC 1496 (Balanced modulator applications).

Unit III  
Acoustics: Microphones – Carbon, moving coil, ribbon, crystals condenser, their working principle and characteristic, Noise Figure and sensitivity and shielding. Loud Speakers – Moving Coil, electrodynamics horn type, multi-way speaker system, cross over network and their frequency characteristic. Various types of sound recording, magnetic recording, disk and crystal recording, Reverberations, building and studio acoustics, high fidelity.

Unit IV
Microwave: Generation of microwave by tubes, limitation of conventional tubes, Klystron amplifiers, reflex Klystron oscillator, magnetrons, traveling wave tube (TWT), backward wave oscillator (BWO), high frequency limitation of transistor, microwave transistor, Manley Rowe relations, parametric amplifiers and frequency multipliers, Gun effect, Gun diode oscillator, Avalanche effect, IMPATT & TRAPATT, BARRITT, TUNNETT, MITATT, microwave field effect transistors, MASER, LASER, Microwave Integrated Circuits (MICs) diode, Schottky barrier and backward diodes, PIN diode and their applications.

Unit V
Logic Families: DTL, ITL, ECL, TTL, MOS Logic Families, parameters and their comparison, transistor logic, interfacing of logic families, Integrated transistor, FET and MOS as switches, switching speed of integrated diode, transistor, FET devices, comparison between TTL and DTL, multi emitter transistor, Characteristics of TTL with Shottkey devices, transfer characteristics of ECL, Fan in and Fan out speed of operation, logic versatility of ECL gates, temperature compensated bias MOS, CMOS and their transfer characteristics, MOS invertors, CMOS inverter, rise and fall time in CMOS gates, interfacing BIT and CMOS gates.
 

List of Experiments: 
1. Char. of Op-Amp (input offset voltage, slew rate CMRR, BW, Input bias current )
2. Linear application of OP-Amp (voltage follower, inviting and non-inverting amplifier and their frequency response adder subtractor differential amplifier, integrator and differential frequency response)
3. Study of Op-Amp as a comparator
4. Design of Schmitt trigger
5. Design of monoastable & astable multivibrator
6. To construct and plot frequency response of low & high pass filter.




                       EX- 406 – ELECTRICAL ENGINEERING SIMULATION LAB-I 




Unit- 1
MATLAB Basics
Simulation Mechanism and Simulation Tools, Starting and Ending MATLAB, MATLAB Desktop, Help Browser, Types of Files, Command Input Assistance,
Operators and Special Characters, Variables and Arrays, Handling Arrays, Useful Built-in Functions, Control Structures, Input/Output Commands, File Handling

Unit- 2
Introduction to Plotting
The plot command, Formatting and Labeling a Plot, Multiple Plots, Adding Legend, Sub Plots, Plotting Complex Data, 2-D and 3-D Plots, Plotting a Function, Plot Editor, Interactive Plotting using Plotting Tool

Unit- 3
Programming in MATLAB
MATLAB Editor, MATLAB Programming, Debugging MATLAB Programs, MATLAB Debugger, Functions and Function Files, Differential Equation Solver, Symbolic Mathematics, Programming Examples

Unit- 4
Basic Electrical and Networks Applications
Analysis of Electrical Networks – Experiments based on Solution of Series-Parallel Circuits, Solution of system with linear equations  - Experiments based on mesh and nodal analysis, Experiments for Validation of Network Theorems, Solution of Network Problems, Solution of First Order Differential Equation – Experiments for the study of Transients, Experiments for AC Signal Waveform Analysis,  Study of Resonance in AC Circuit, Study of Frequency Response
Waveform Analysis,  Study of Resonance in AC Circuit, Study of Frequency Response

Unit- 5
System Modeling using SIMULINK
Simulation Steps, Getting Simulink, Creating and Simulating a Simulink Model, Simulink Solution of Differential Equation, Assigning Variables, Observing Variables During Simulation, Storing/Saving Data, Linking M-file with Model file, Creating and Masking Sub-systems, Solution using Laplace Transform Approach, Solution using Laplace Transform Approach, Study of dynamic response, Simulation of Non-Linear System, Examples such as Simulink model to generate sine, cosine waveform and ramp signal

Continue Reading →

RGPV B.E Information Technology 4th Semester (Grading System) Syllabus

                                           B.E. 401 - ENGINEERING MATHEMATICS III 


Unit I 
Functions of complex variables : Analytic functions, Harmonic Conjugate, Cauchy-Riemann Equations, Line Integral, Cauchy’s Theorem, Cauchy’s Integral Formula, Singular Points, Poles & Residues, Residue Theorem , Application of Residues theorem for evaluation of real integrals

Unit II 
Errors & Approximations, Solution of Algebraic & Trancedental Equations (Regula  Falsi , Newton-Raphson, Iterative, Secant Method), Solution of simultaneous linear equatins by Gauss Elimination, Gauss Jordan, Crout’s methods , Jacobi’s  and Gauss-Siedel Iterative methods

Unit III
Difference Operators, Interpolation ( Newton Forward & Backward Formulae, Central  Interpolation Formulae, Lagrange’s and divided difference formulae ),  Numerical Differentiation and Numerical Integration.

Unit IV
Solution of Ordinary Differential Equations(Taylor’s Series, Picard’s Method, Modified Euler’s Method, Runge-Kutta Method, Milne’s Predictor & Corrector method ),  Correlation and Regression, Curve Fitting (Method of Least Square).

Unit  V
Concept of Probability : Probability Mass function, Probability density function. Discrete  Distribution: Binomial, Poisson’s, Continuous Distribution: Normal Distribution, Exponential Distribution ,Gamma Distribution ,Beta Distribution ,Testing of Hypothesis |:Students t-test,  Fisher’s z-test, Chi-Square Method


 
                                  IT- 402 – COMPUTER SYSTEM ORGANIZATION 


Unit I
Computer Basics and CPU : Von Newman model, various subsystems, CPU, Memory, I/O, System Bus, CPU and Memory registers, Program Counter, Accumulator, Instruction register, Micro operations, Register Transfer Language, Instruction Fetch, decode and execution, data movement and manipulation, Instruction formats and addressing modes of basic computer. 8085 microprocessor organization

Unit-II
Control Unit Organization : Hardwired control unit, Micro and nano programmed control unit, Control Memory, Address Sequencing, Micro Instruction formats, Micro program sequencer, Microprogramming, Arithmetic and Logic Unit: Arithmetic Processor, Addition, subtraction, multiplication and division, Floating point and decimal arithmetic and arithmetic units, design of arithmetic unit.

Unit-III  
Input Output Organization: Modes of data transfer – program controlled, interrupt driven and direct memory access, Interrupt structures, I/O Interface, Asynchronous data transfer, I/O processor, 8085 I/O structure, 8085 instruction set and basic programming. Data transfer – Serial / parallel, synchronous/asynchronous, simplex/half duplex and full duplex.

Unit-IV
Memory organization: Memory Maps, Memory Hierarchy, Cache Memory - Organization and mappings. Associative memory, Virtual memory, Memory Management Hardware.

Unit V
Multiprocessors: Pipeline and Vector processing, Instruction and arithmetic pipelines, Vector and array processors, Interconnection structure and inter-processor communication.



                             IT- 403 – DATABASE MANAGEMENT SYSTEM


Unit 1:
Basic Concepts: DBMS Concepts and architecture Introduction, Review of file organization techniques, Database approach v/s Traditional tile accessing approach, Advantages of database systems, Data models, Schemas and instances, Data independence, Functions of DBA and designer. Entities and attributes, Entity types, Value, Sets, Key attributes, Relationships, Defining the E-R diagram of database,

Unit 2:
Data models and Relational Databases Various data models, Basic concepts of Hierarchical data model, Network data model, and Relational data model, Comparison between the three types of models, Relational Data models: Domains, Tuples, Attributes, Relations, Characteristics of relations, Keys, Key attributes of relation, Relational database, Schemas, Integrity constraints, Intension and Extension,

Unit 3:
Structured Query Language Relational Query languages: Relational algebra and relational calculus, Relational algebra operations like select, Project, Join, Division, outer union. SQL : Data definition in SQL, update statements and views in SQL QUEL & QBE: Data storage and definitions, Data retrieval queries and update statements.

Unit 4:
Database Design Data Base Design: Introduction to normalization, Normal forms, Functional dependency, Decomposition, Dependency preservation and lossless join, problems with null valued and dangling tuples, multi-valued dependencies.

Unit 5:
Advance Concepts: Introduction to: Distributed databases, protection, security and integrity constraints, concurrent operation on databases, recovery and transaction processing, basic concepts of object oriented data base system and design.



                               IT- 404 – ANALYSIS DESIGN & ALGORITHM 


Unit I  
Algorithms, Designing algorithms, analyzing algorithms, asymptotic notations, heap and heap sort. Introduction to divide and conquer technique, analysis, design and comparison of various algorithms based on this technique, example binary search, merge sort, quick sort, strassen’s matrix multiplication.

Unit II
Study of Greedy strategy, examples of greedy method like optimal merge patterns, Huffman coding, minimum spanning trees, knapsack problem, job sequencing with deadlines, single source shortest path algorithm, etc.

Unit III
Concept of dynamic programming, problems based on this approach such as 0/1 knapsack, multistage graph, reliability design, Floyd-Warshall algorithm, etc.

Unit IV
Backtracking concept and its examples like 8 queen’s problem, Hamiltonian cycle, Graph coloring problem etc. Introduction to branch & bound method, examples of branch and bound method like traveling salesman problem etc. Meaning of lower bound theory and its use in solving algebraic problem, introduction to parallel algorithms.

Unit V
Binary search trees, height balanced trees, 2-3 trees, B-trees, basic search and traversal techniques for trees and graphs (In order, preorder, postorder, DFS, BFS), NP-completeness.


List of Experiments( expandable): 
1. Write a program for Iterative and Recursive Binary Search.
2. Write a program for Merge Sort.
3. Write a program for Quick Sort.
4. Write a program for Strassen’s Matrix Multiplication.
5. Write a program for optimal merge patterns.
6. Write a program for Huffman coding.
7. Write a program for minimum spanning trees using Kruskal’s algorithm.
8. Write a program for minimum spanning trees using Prim’s algorithm.
9. Write a program for single sources shortest path algorithm.
10. Write a program for Floye-Warshal algorithm.
11. Write a program for traveling salesman problem.
12. Write a program for Hamiltonian cycle problem.      



                                      IT- 405 – ANALOG DIGITAL COMM



Unit-I  
Time domain and frequency domain representation of signal, Fourier Transform and its properties, Transform of Gate, Periodic gate, Impulse periodic impulse sine and cosine wave, Concept of energy density and power density (Parseval’s theorem), Power density of periodic gate and impulse function, impulse response of a system, convolutions, convolution with impulse function, causal and non causal system impulse response of ideal low pass filter, Correlation & Auto correlation.

Unit-II
Base band signal, need of modulation, Introduction of modulations techniques,Amplitude modulation, Equation and its frequency domain representation, Bandwidth, Power distribution. AM suppressed carrier waveform equation and frequency domain representation Generation (Balance/Chopper modulator) and synchronous detection technique, errors in synchronous detection, Introduction to SSB and VSB Transmission Angle modulation, Frequency and phase modulation equation and their relative phase and frequency deviations, modulation index frequency spectrum, NBFM and WBFM, Bandwidth comparison of modulation techniques.

Unit-III
Sampling of signal, sampling theorem for low pass and Band pass signal, Pulse amplitude modulation (PAM), Time division, multiplexing (TDM). Channel Bandwidth for PAM-TDM signal Type of sampling instantaneous, Natural and flat top, Aperture effect, Introduction to pulse position and pulse duration modulations, Digital signal, Quantization, Quantization error, Pulse code modulation, signal to noise ratio, Companding, Data rate and Baud rate, Bit rate, multiplexed PCM signal, Differential PCM (DPCM), Delta Modulation (DM) and Adaptive Delta Modulation (ADM), comparison of various systems.

Unit-IV  
Digital modulations techniques, Generation, detection, equation and Bandwidth of amplitude shift keying (ASK) Binary Phase Shift keying (BPSK), Differential phase shift keying (DPSK), offset and non offset quadrature phase shift keying (QPSK), M-Ary PSK, Binary frequency Shift Keying (BFSK), M-Ary FSK Quadrature Amplitude modulation (QAM), MODEM, Introduction to probability of error.

Unit-V
Information theory and coding- Information, entropies (Marginal and conditional), Model of a communication system, Mathematical representation of source, channel and receiver characteristics, Mutual information, channel capacity efficiency of noise free channel Binary symmetric channel (BSC) Binary erasure channel (BEC), Repetition of signal, NM symmetric Binary channel, Shannon theorem, Shanon-Hartley theorem (S/N-BW trade off)Source encoding code properties; Shanon, Fano and Huffman coding methods and their efficiency error control coding, Minimum Hamming distance, Linear Block Code, Cyclic code and convolution codes. Line Encoding: Manchester coding, RZ, NRZ coding.

 
List of Experiments(Expandable) 
1. Study of sampling process and signal reconstruction and aliasing.
2. Study of PAM PPM and PDM
3. Study of PCM transmitter and receiver.
4. Time division multiplexing (TDM) and De multiplexing
5. Study of ASK PSK and FSK transmitter and receiver.
6. Study of AM modulation and Demodulation techniques (Transmitter and Receiver) Calculate of parameters
7. Study of FM modulation and demodulation (Transmitter and Receiver) & Calculation of parameters
8. To construct and verify pre emphasis and de-emphasis and plot the wave forms.
9. Study of super heterodyne receiver and characteristics of ratio radio receiver.
10. To construct frequency multiplier circuit and to observe the waveform
11. Study of AVC and AFC.                                      

 
                                                           
                                                                   IT- 406 – DOT NET  


UNIT I 
Introduction .NET framework, features of .Net framework, architecture and component of .Net, elements of .Net.

UNIT II  
Basic Features Of C# Fundamentals, Classes and Objects, Inheritance and Polymorphism, Operator Overloading, Structures. Advanced Features Of C# Interfaces, Arrays, Indexers and Collections; Strings and Regular Expressions, Handling Exceptions, Delegates and Events.

UNIT III
Installing ASP.NET framework, overview of the ASP .net framework, overview of CLR, class library, overview of ASP.net control, understanding HTML controls, study of standard controls, validations controls, rich controls. Windows Forms: All about windows form, MDI form, creating windows applications, adding controls to forms, handling Events, and using various Tolls

UNIT IV  
Understanding and handling controls events, ADO.NET- Component object model, ODBC, OLEDB, and SQL connected mode, disconnected mode, dataset, data-reader Data base controls: Overview of data access data control, using grid view controls, using details view and frame view controls, ado .net data readers, SQL data source control, object data source control, site map data source.

UNIT V 
XML:  Introducing XML, Structure, and syntax of XML, document type definition (DTD), XML Schema, Document object model, Presenting and Handling XML. xml data source, using navigation controls, introduction of web parts, using java script, Web Services


List of Experiments/ program (Expandable): 
1. Working with call backs and delegates in C#
2. Code access security with C#.
3. Creating a COM+ component with C#.
4. Creating a Windows Service with C#
5. Interacting with a Windows Service with C#
6. Using Reflection in C#
7. Sending Mail and SMTP Mail and C#
8. Perform String Manipulation with the String Builder and String Classes and C#:
9. Using the System .Net Web Client to Retrieve or Upload Data with C#
10. Reading and Writing XML Documents with the XML Text-Reader/-Writer Class and C#
11. Working with Page using ASP .Net.
12. Working with Forms using ASP .Net
13. Data Sources access through ADO.Net,
14. Working with Data readers , Transactions
15. Creating Web Application.

Continue Reading →

RGPV B.E Computer Science 4th Sem (Grading System) Syllabus

                                         B.E. 401 - ENGINEERING MATHEMATICS III 


Unit I 
Functions of complex variables : Analytic functions, Harmonic Conjugate, Cauchy-Riemann Equations, Line Integral, Cauchy’s Theorem, Cauchy’s Integral Formula, Singular Points, Poles & Residues, Residue Theorem , Application of Residues theorem for evaluation of real integrals

Unit II 
Errors & Approximations, Solution of Algebraic & Trancedental Equations (Regula  Falsi , Newton-Raphson, Iterative, Secant Method), Solution of simultaneous linear equatins by Gauss Elimination, Gauss Jordan, Crout’s methods , Jacobi’s  and Gauss-Siedel Iterative methods

Unit III 
Difference Operators, Interpolation ( Newton Forward & Backward Formulae, Central  Interpolation Formulae, Lagrange’s and divided difference formulae ),  Numerical Differentiation and Numerical Integration.

Unit IV 
Solution of Ordinary Differential Equations(Taylor’s Series, Picard’s Method, Modified Euler’s Method, Runge-Kutta Method, Milne’s Predictor & Corrector method ),  Correlation and Regression, Curve Fitting (Method of Least Square).

Unit  V 
Concept of Probability : Probability Mass function, Probability density function. Discrete  Distribution: Binomial, Poisson’s, Continuous Distribution: Normal Distribution, Exponential Distribution ,Gamma Distribution ,Beta Distribution ,Testing of Hypothesis |:Students t-test,  Fisher’s z-test, Chi-Square Method



                                         CS- 402 – Computer System Organization 


Unit I
Computer Basics and CPU : Von Newman model, various subsystems, CPU, Memory, I/O, System Bus, CPU and Memory registers, Program Counter, Accumulator, Instruction register, Micro operations, Register Transfer Language, Instruction Fetch, decode and execution, data movement and manipulation, Instruction formats and addressing modes of basic computer. 8085 microprocessor organization

Unit-II
Control Unit Organization : Hardwired control unit, Micro and nano programmed control unit, Control Memory, Address Sequencing, Micro Instruction formats, Micro program sequencer, Microprogramming, Arithmetic and Logic Unit: Arithmetic Processor, Addition, subtraction, multiplication and division, Floating point and decimal arithmetic and arithmetic units, design of arithmetic unit.

Unit-III
Input Output Organization: Modes of data transfer – program controlled, interrupt driven and direct memory access, Interrupt structures, I/O Interface, Asynchronous data transfer, I/O processor, 8085 I/O structure, 8085 instruction set and basic programming. Data transfer – Serial / parallel, synchronous/asynchronous, simplex/half duplex and full duplex.

Unit-IV
Memory organization: Memory Maps, Memory Hierarchy, Cache Memory - Organization and mappings. Associative memory, Virtual memory, Memory Management Hardware.

Unit V 
Multiprocessors: Pipeline and Vector processing, Instruction and arithmetic pipelines, Vector and array processors, Interconnection structure and inter-processor communication.



                                        CS- 403 –  Object Oriented Technology


Unit I  
Abstract data types, Objects and classes, Attributes and Methods, Objects as software units, Encapsulation and Information hiding, Objects instantiations and interactions, Object lifetime, Static and dynamic objects, global and local objects, Metaclass, Modeling the real world objects.

Unit II
Relationships between classes, Association of objects, Types of Association, Recursive Association, Multiplicities, Navigability, Named association, Aggregation of objects. Types of Aggregation, Delegation, Modeling Association and Aggregation.

Unit III
Inheritance and Polymorphism, Types of polymorphism, Static and dynamic polymorphism, Operator and Method overloading, Inherited methods, Redefined methods, the protected interface, Abstract methods and classes, Public and protected properties, Private operations, Disinheritance, Multiple inheritance.

Unit IV  
Container Classes, Container types, typical functions and iterator methods, Heterogeneous containers, Persistent objects, stream, and files, Object oriented programming languages,

Unit V
Study of C++/Java as Object-oriented programming language. References: 1. David Parsons; Object oriented programming with C++; BPB publication 2. Object oriented programming in C++ by Robert Lafore: Galgotia 3. Balagurusamy; Object oriented programming with C++; TMH 4. Java Complete
 


                                              CS- 404 –  Analysis & Design of Algorithm


Unit I
Algorithms, Designing algorithms, analyzing algorithms, asymptotic notations, heap and heap sort. Introduction to divide and conquer technique, analysis, design and comparison of various algorithms based on this technique, example binary search, merge sort, quick sort, strassen’s matrix multiplication.

Unit II  
Study of Greedy strategy, examples of greedy method like optimal merge patterns, Huffman coding, minimum spanning trees, knapsack problem, job sequencing with deadlines, single source shortest path algorithm

Unit III  
Concept of dynamic programming, problems based on this approach such as 0/1 knapsack, multistage graph, reliability design, Floyd-Warshall algorithm

Unit IV
Backtracking concept and its examples like 8 queen’s problem, Hamiltonian cycle, Graph coloring problem etc. Introduction to branch & bound method, examples of branch and bound method like traveling salesman problem etc. Meaning of lower bound theory and its use in solving algebraic problem, introduction to parallel algorithms.

Unit V  
Binary search trees, height balanced trees, 2-3 trees, B-trees, basic search and traversal techniques for trees and graphs (In order, preorder, postorder, DFS, BFS), NP-completeness.


List of Experiments( expandable):
1. Write a program for Iterative and Recursive Binary Search.
2. Write a program for Merge Sort.
3. Write a program for Quick Sort.
4. Write a program for Strassen’s Matrix Multiplication.
5. Write a program for optimal merge patterns.
6. Write a program for Huffman coding.
7. Write a program for minimum spanning trees using Kruskal’s algorithm.
8. Write a program for minimum spanning trees using Prim’s algorithm.
9. Write a program for single sources shortest path algorithm.
10. Write a program for Floye-Warshal algorithm.
11. Write a program for traveling salesman problem.
12. Write a program for Hamiltonian cycle problem.      



                                      CS- 405 –  Analog & Digital Communication


Unit-I
Time domain and frequency domain representation of signal, Fourier Transform and its properties, Transform of Gate, Periodic gate, Impulse periodic impulse sine and cosine wave, Concept of energy density and power density (Parseval’s theorem), Power density of periodic gate and impulse function, impulse response of a system, convolutions, convolution with impulse function, causal and non causal system impulse response of ideal low pass filter, Correlation & Auto correlation.

Unit-II
Base band signal, need of modulation, Introduction of modulations techniques,Amplitude modulation, Equation and its frequency domain representation, Bandwidth, Power distribution. AM suppressed carrier waveform equation and frequency domain representation Generation (Balance/Chopper modulator) and synchronous detection technique, errors in synchronous detection, Introduction to SSB and VSB Transmission Angle modulation, Frequency and phase modulation equation and their relative phase and frequency deviations, modulation index frequency spectrum, NBFM and WBFM, Bandwidth comparison of modulation techniques.

Unit-III
Sampling of signal, sampling theorem for low pass and Band pass signal, Pulse amplitude modulation (PAM), Time division, multiplexing (TDM). Channel Bandwidth for PAM-TDM signal Type of sampling instantaneous, Natural and flat top, Aperture effect, Introduction to pulse position and pulse duration modulations, Digital signal, Quantization, Quantization error, Pulse code modulation, signal to noise ratio, Companding, Data rate and Baud rate, Bit rate, multiplexed PCM signal, Differential PCM (DPCM), Delta Modulation (DM) and Adaptive Delta Modulation (ADM), comparison of various systems.

Unit-IV
Digital modulations techniques, Generation, detection, equation and Bandwidth of amplitude shift keying (ASK) Binary Phase Shift keying (BPSK), Differential phase shift keying (DPSK), offset and non offset quadrature phase shift keying (QPSK), M-Ary PSK, Binary frequency Shift Keying (BFSK), M-Ary FSK Quadrature Amplitude modulation (QAM), MODEM, Introduction to probability of error.

Unit-V
Information theory and coding- Information, entropies (Marginal and conditional), Model of a communication system, Mathematical representation of source, channel and receiver characteristics, Mutual information, channel capacity efficiency of noise free channel Binary symmetric channel (BSC) Binary erasure channel (BEC), Repetition of signal, NM symmetric Binary channel, Shannon theorem, Shanon-Hartley theorem (S/N-BW trade off)Source encoding code properties; Shanon, Fano and Huffman coding methods and their efficiency error control coding, Minimum Hamming distance, Linear Block Code, Cyclic code and convolution codes. Line Encoding: Manchester coding, RZ, NRZ coding.


List of Experiments(Expandable)
1. Study of sampling process and signal reconstruction and aliasing.
2. Study of PAM PPM and PDM
3. Study of PCM transmitter and receiver.
4. Time division multiplexing (TDM) and De multiplexing
5. Study of ASK PSK and FSK transmitter and receiver.
6. Study of AM modulation and Demodulation techniques (Transmitter and Receiver) Calculate of     parameters
7. Study of FM modulation and demodulation (Transmitter and Receiver) & Calculation of     parameters
8. To construct and verify pre emphasis and de-emphasis and plot the wave forms.
9. Study of super hetrodyne receiver and characteristics of ratio radio receiver.
10. To construct frequency multiplier circuit and to observe the waveform
11. Study of AVC and AFC.                                        

 

                                 CS- 406 –  Computer Programming –IV (.Net Technologies)



UNIT I
Introduction .NET framework, features of .Net framework, architecture and component of .Net, elements of .Net.

UNIT II
Basic Features Of C# Fundamentals, Classes and Objects, Inheritance and Polymorphism, Operator Overloading, Structures. Advanced Features Of C# Interfaces, Arrays, Indexers and Collections; Strings and Regular Expressions, Handling Exceptions, Delegates and Events.

UNIT III 
Installing ASP.NET framework, overview of the ASP .net framework, overview of CLR, class library, overview of ASP.net control, understanding HTML controls, study of standard controls, validations controls, rich controls. Windows Forms: All about windows form, MDI form, creating windows applications, adding controls to forms, handling Events, and using various Tolls

UNIT IV
Understanding and handling controls events, ADO.NET- Component object model, ODBC, OLEDB, and SQL connected mode, disconnected mode, dataset, data-reader Data base controls: Overview of data access data control, using grid view controls, using details view and frame view controls, ado .net data readers, SQL data source control, object data source control, site map data source.

UNIT V  
XML: Introducing XML, Structure, and syntax of XML, document type definition (DTD), XML Schema, Document object model, Presenting and Handling XML. xml data source, using navigation controls, introduction of web parts, using java script, Web Services


List of Experiments/ program (Expandable): 
1. Working with call backs and delegates in C#
2. Code access security with C#.
3. Creating a COM+ component with C#.
4. Creating a Windows Service with C#
5. Interacting with a Windows Service with C#
6. Using Reflection in C#
7. Sending Mail and SMTP Mail and C#
8. Perform String Manipulation with the String Builder and String Classes and C#:
9. Using the System .Net Web Client to Retrieve or Upload Data with C#
10. Reading and Writing XML Documents with the XML Text-Reader/-Writer Class and C#
11. Working with Page using ASP .Net.
12. Working with Forms using ASP .Net
13. Data Sources access through ADO.Net,
14. Working with Data readers , Transactions
15. Creating Web Application.

Continue Reading →